0.0 Requirements
1.0 What is WinGate?
1.1 Why would I use it?
1.2 How could I use it?
1.3 How could I find one?
=============================================================================
0.0 Requirements
1.0 What is Wingate?
WinGate is a
proxy server firewall software package that allows you to share a
single (or multiple) Internet connections with an entire computer
network. The Internet connection shared by WinGate can be of nearly
any type, including dial up modem, ISDN, xDSL, cable modem, satellite
connection, or even dedicated T1 circuits.
|
1.1 Why would I use it?
Well it is very
simple. Think of Wingate as a gate to the internet. Once you find
one, you can use it to connect to any network or computer that you
wish. But I can do that with my own box you say...well the benefit
of a Wingate server is that it will hide your IP to the computer you
are connecting to, it will only reveal the Wingate servers IP and
not your own (if at this point you still don't see how this could
be helpfull in hacking, QUIT). However, some Wingate servers keep
logs and thus you could be traced, solution, link multiple Winagte
servers before you start hacking.
|
1.2 How could I use it?
Here comes the
interesting part. Let's say I have 5 Wingate server IP's to work with
:
200.231.12.1
-> A
124.103.43.5 -> B
190.233.12.1 -> C
189.121.32.4 -> D
200.232.22.1 -> E |
Run your telnet application and connect to port 23 of A (above), this
is the prompt you will get:
From there connect to B like this :
This will connect you to B , then do the same from B to C to D and
E. Thus we have this sort of a chain :
| your BOX
-> your ISP -> A -> B -> C -> D -> E -> any box you want to
hack > |
From E you could connect to a hacked shell account or a free shell
account that you setup with (I hope) fake information. This process
of chaining will hide your IP and make you hard (but not impossible)
to trace. If you are still confused, this is what happens :
| only A
sees your real IP - B sees A's IP - C sees B's IP and so on...........
|
To connect to different ports (because by default you will be connecting
to the Telnet port 23) this is what you do :
WinGate>121.433.23.1:port_number
FTP = 21 ; SMPT = 25 ; FINGER = 79 |
Final note, many administrators will rather patch the hole in their
system rather then trace your ass through 6 or more WinGates, so it
is pretty safe.
|
1.3 How could I find one?
Well, you need
a WinGate scanner which you can download from the link below (working
13/09/98) and scan domains. This will be very time consuming. Here
is a better way :
Connect to Warez,Hacking,Phreaking channels on IRC and scan peoples
domain names. Many of the parties involved have bounced through a
WinGate server and thus you will be able to find them much quicker.
But what do you mean "bouced through a WinGate server", well that's
another publication................................................................
Also try "/stats g " in one of these channels : #hackphreak ; #warez950
|
============================================================================
All questions and/or corrections should be directed to :
c1ph3r@hotmail.com
EOF.
|